Clarion VXZ766 - Manual (Page 28)

OPERATIONS
28
VXZ766
English
Precautions when creating
MP3/WMA disc
zUsable sampling rates and bit rates:
1. MP3: Sampling rate 32 kHz-48 kHz, Bit rate:
8 kbps-320 kbps / VBR
2. WMA: Bit rate 32 kbps-192 kbps
zFile extensions
1. Always add a file extension “.MP3” or “.WMA”
to MP3 or WMA file by using single byte
letters. If you add a file extension other than
specified or forget to add the file extension,
the file cannot be played.
2. If files other than MP3/WMA are played,
playback stops and the message “NOT
SPRT” appears in the display.
zLogical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2 or JOLIET or Romeo” as the writing
software format. Normal play may not be
possible if the disc is recorded on another
format.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 62 single byte
ASCII characters (including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
zFolder structure
1. A disc with a folder having more than 8
hierarchical levels will be impossible.
zNumber of files or folders
1. Up to 512 files/512 folders can be played. But
if there are 999 files in one folder, other
folders cannot be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks might not
always be played in the order displayed on
the PC.)
3. Some noise may occur depending on the
type of encoder software used while
recording.
4. In case of a track recorded at VBR (variable
bit rate), the display for the play time of the
track may be slightly different from the actual
play time.
Also, the recommended value of VBR ranges
from 64 kbps to 320 kbps.
5. Depending on the damage conditions of a
file, it may occur that the file is not played and
the next file is played instead.
Also, if the damage is in a severe condition,
playback stops and the error message
appears in the display. For details on error
messages, refer to the section “11. ERROR
DISPLAYS” (P. 49)
.
Top function
The top function resets the MP3/WMA player to
the first track of a folder being played.
1. Press the [BND] button to play the first track
(track No. 1) of a folder.
Pausing play
1. Press the [ ] button during playback.
2. Press the [ ] button again, and playback
resumes.
Displaying MP3/WMA titles
This unit can display title data for MP3/WMA
disc.
1. Each time you press the [TITLE] button, the
title changes in the following order:
Folder ➜ TRACK ➜ Album TAG ➜ Artist
TAG ➜ Title TAG ➜ Folder...
Notes:
• If MP3/WMA disc is not input TAG, “NO TAG”
appears in the display.
• For MP3, supports ID3 Tags V2.4 / 2.3 / 1.1 / 1.0.
• Tag displays give priority to V2.4 / 2.3.
• In the case of album Tags for WMA, the
information written into the extension header is
displayed.
• Only ASCII characters can be displayed in Tags.
VXZ766.book Page 28 Monday, January 16, 2006 6:43 PM