Clarion VXZ766 - Manual (Page 31)

OPERATIONS
VXZ766
31
English
Setting up the screen size
Set up the screen size according to the TV
monitor to which the unit is connected.
• The factory default setting is “NORMAL/PS”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “TV DISPLAY” from
“GENERAL SETUP”, and press the “
”
button to go to the option list.
2. Press the “ ” or “ ” button to select a
screen size.
• The color of the selected item changes.
zWhen watching through a conventional
TV monitor (4:3)
• NORMAL/PS : The leftmost and rightmost areas
of the screen are cut off.
This function allows displaying the important
part of image fully on the screen. In some
cases, image is displayed while being panned
(scrolled).
• NORMAL/LB : A black zone is created in the top
and bottom areas of the screen.
This method displays Cinema Scope and Vista
Vision images without cutting them off by
creating a black zone on the top and bottom
gaps.
zWhen watching through a wide TV
monitor (16:9)
• WIDE:
3. Press the [ENT] button to enter.
Setting up the angle mark display
You can set up so that the angle mark appears
on scenes where the angles can be switched.
• The factory default setting is “ON”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “ANGLE MARK” from
“GENERAL SETUP”, and press the “
”
button to go to the option list.
2. Press the “ ” or “ ” button to select “ON”
or “OFF”.
3. Press the [ENT] button.
G E N E R A L S E T U P
T V D I S P L A Y N O R M A L / L B
P R E S S E N T E R T O S E L E C T
W I D E
W I D E
N O R M A L / P S
G E N E R A L S E T U P
O N
P R E S S E N T E R T O S E L E C T
A N G L E M A R K O F F
W I D E
VXZ766.book Page 31 Monday, January 16, 2006 6:43 PM