Expert Sleepers Oomingmak v1.0.0 - Manual (Page 20)

Amount
Sets the amount of modulation applied.
PWM LFO
This section lets you apply a low frequency modulation to
the Oscillator’s square wave’s pulse-width.
Shape/Speed/Amount
As for the Filter LFO, above.
Mix
This section sets the output levels of the
various other sections. Refer to the
overview diagram if needed to clarify
what these settings control exactly.
Dry
Sets the level of the unprocessed audio
(or the audio filtered by the Input Filter if the Use Filtered For Dry option is set).
Wet
Sets the level of the ReSynth section.
Osc
Sets the level of the Oscillator.
Dry RM
Sets the level of the ring modulator driven by the Dry signal and the Oscillator.
Wet RM
Sets the level of the ring modulator driven by the ReSynth signal and the Oscillator.