Expert Sleepers Oomingmak v1.0.0 - Manual (Page 21)

Preferences
Pressing the ‘Prefs’ button brings up a dialog where various
preferences are set. These settings are shared by all instances of
Oomingmak, and are not stored with presets.
The top section shows the product version.
The central section will show your serial number once you’ve bought a registration.
OSC Base Port
Sets the base port number for OSC. See the section on OSC, below .
Eye candy
Enables the pretty graphics. Turn off if you don’t like them, or if your computer has com-
patibility issues with drawing such things.
Constant redraw
Is on by default. If turned off, the GUI is only redrawn when a control changes. Use this if
you’re concerned that the GUI is wasting your CPU resources. Note that the display of
tracked pitch and envelope is useless if constant redraw is disabled.