COBY electronic TFDVD2697 - Manual (Page 10)

4
>
>
1 2 3 4 5
8 9 10 11
12 13
6 7
1. Power Jack
Connect to the power supply.
2. HDMI2
HDMI2 connector
3. HDMI1
HDMI1 connector.
4. VGA
Connect with the VGA port on the computer.
5. Component Input1
YCb/Pb Cr/Pr - - Input the video signal.
L, R - - Input the audio signal.
6. S-VIDEO1
Input the S-Video signal.
7. OPTICAL Out
Connect with the digital audio decoder.
Wall Mounting
The TV case can be attached onto the wall,
using the VESA standard mounting.
1. Release the screws and take off the unit
stand.
2. Use VESA standard mountings to fix the unit
onto the wall. Take care when mounting, it may
cause damage or serious injury should it fall
from the wall.
See the Specifications page for VESA
information.
8. PC Audio In
Input the PC audio signal.
9. Component Input 2
YCb/Pb Cr/Pr - - Input the video signal.
L, R - - Input the audio signal.
10. AV1 Input
VIDEO 1 - - Input the video signal.
L, R - - Input the audio signal.
11. Antenna Jack
Connect with the TV RF signal source.
12. Phone Jack
Connect with the stereo phone.
13. AV2 Input
VIDEO 2 - - Input the video signal.
L, R - - Input the audio signal.
<
<
>
>
200mm
e.g. TFDVD 2697 REAR CABINET
RELEASE
SCREWS AND
TAKE OFF THE
STAND
200mm
MACHINE THREAD x4
VESA STANDARD M5
Unit's rear panel
Unit View