COBY electronic TFDVD2697 - Manual (Page 14)

8
Figure. Cable connections
Antenna/Power Connection
Connect TV RF sources to the antenna port. TV RF signals include: receiving antenna/CATV net. You 1.
can use 75 Ohm coaxial cable to connect outdoor antenna.
Insert one end of the supplied power cord to the player’s power jack and the other end to the 110-240V 2.
AC wall outlet.
Compoent Input1/2 (Y Cb/Pb Cr/Pr)
The component port is capable of accepting high-definition signals from standard video sources. (e.g., cable/
satellite boxes, DVD players, VCRs, etc.)
Connect the Y/Pb/Pr port by the component cable to input the video signal. 1.
Connect “R” "L" port by the supplied AV cable to input the audio signal. The red/white plug of the AV 2.
cable is for the audio conneciton and the yellow plug for the video connection.
S-Video Input
The S-Video port is capable of accepting signals from standard video sources. (e.g., cable/satellite boxes,
DVD players, VCRs, etc.)
Connect the S-Video port by the S-Video cable to input the video signal. 1.
Connect the AUDIO-L/R port by the supplied AV cable to input the audio signal. 2.
Cable Connections
>
>
External AV Source
Amplifier or Digital Decoder
Set the unit into the relative input/output
mode to enable the signal pass.
NOTE:
We supply one set of AV cable and one piece of power cord with this
product. The white/red plug of the AV cable is for the audio connection and
the yellow plug for the video connection.
The white/red plug of the AV cable can also be used separately to input
the audio signal in the S-video/Component connection.