Fieldmann FZF 4010-E - Manual (Page 10)

FZF 4010-E
10 EN Machine description and package content | Assembly instructions | Operation
3. MACHINE DESCRIPTION AND
PACKAGE CONTENT
Machine Description (see Fig. 1)
1.
2.
3.
4.
5.
6.
Cord guard
Main handle
On/off switch
Additional handle
Blower tube
Engine cover 7.
8.
9.
10.
11.
Function switch
Collection bag
Wheel
Shoulder harness
Speed control governor
Package Content
Remove the machine carefully from the packaging and check the completeness of the following
parts:
Suction/blower tube with wheels
Middle suction/blower tube
Garden vacuum/blower body
Collection bag
Suction tube fixing screws (4 screws)
Operating instructions
4. ASSEMBLY INSTRUCTIONS
Slide the upper tube into the motor housing, then tighten the screws and make sure the tube
is firmly fixed with motor housing. (Fig. 2)
Insert the lower tube into the upper tube and push them until they are connected firmly
together and then tighten the screws. (Fig. 3)
Assemble the wheels to the lower tube. (Fig. 4)
Attach the collection bag to the hook on the upper tube and the outlet on the bottom of the
motor housing.
ATTENTION! In the interest of safety the tubes should not be dismantled after they have
been assembled.
5. OPERATION
ATTENTION! Before stating the machine, make sure that collection bag is fitted and the
shoulder harness is adjusted in a suitable working position.