Fieldmann FDV 1002-A - Manual (Page 13)

EN
CORDLESS DRILLS OPERATING INSTRUCTIONS
13 Operating instructions
Pay constant attention, watch what your are doing and think when working with power tools. Do not use
power tools if you are tired or under the infl uence of drugs, alcohol or medication. A moment of carelessness
when working with power tools may lead to serious injury.
Prevent the situation where the tool is turned on accidentally. Ensure the trigger switch is in the Off position
before connecting the power cord to the power socket. Carrying power tools with the fi nger on the main
trigger switch or connecting the power cord to the power socket when the main trigger switch is in the On
position may cause injury.
Do not get in your own way. When working, always maintain a fi rm posture and balance. This will make it
possible to better control the power tool in unexpected situations.
Use clamps or a vice to fasten the workpiece. It is safer than holding the workpiece in your hand and at the
same time you have both hands free to operate the tool.
Keep the working area tidy and well illuminated. A cluttered and badly lit work area may lead to injury.
Do not work with the power tool in an explosive environment, such as for example areas where there are fl
ammable liquid, gas or powder substances. Sparks are made inside the power tool, which may cause the
ignition of fl ammable powder or vapour.
Do not work with materials containing asbestos. Use a dust mask.
When working with the tool ensure there is a safe distance from children and other persons. Distractions
may lead to a loss of control over the tool.
Purpose of use
This tool is not designed for professional use.
Do not use the product for purposes other than those intended.
For safety reasons the machine must not be used as a drive engine for any other work tools and tool sets,
unless expressly permitted by the manufacturer.
Instructions for use
Turn on and operate the machine as described in the user's manual, carefully follow all instructions.
Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power cable from
the mains power supply.
Use tools in good working condition for tasks for which they are designed.
Work only during good visibility or ensure suffi cient artifi cial lighting.
Work in a clean and tidy working environment.
Make sure that while working you maintain a fi rm and stable stance. Do not forget that falls represent one of
the major causes of injuries during accidents.
When drilling metal sheets use a vice and place a piece of wood underneath the sheet. A rotating metal sheet
presents a serious risk.
Make sure that the drill or screwdriver are not used for work on items under live current, to prevent injury by
electrical shock. Before using this tool, check that you know the location of all electrical conductors or cables
in the wall (use a metal detector for this purpose).
Only store and use the product away from fl ammable or volatile materials and solutions.
Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not use in a
dusty environment.