Fieldmann FDV 1002-A - Manual (Page 17)

EN
CORDLESS DRILLS OPERATING INSTRUCTIONS
17 Mainetance and storage
Use hearing protection. Excessive noise levels may cause hearing damage.
When performing tasks, where the working tools may come into contact with hidden electrical conductors,
hold the electric power tool by the insulated part that is intended to be held. A work tool that comes into
contact with a "live" electrical conductor, will cause the uninsulated parts of the tool to become live and may
subsequently cause injury by electrical shock to the operator.
For repairs contact an authorised service centre or vendor who will use original spare parts. This will ensure
the correct operation of the electric power tool.
ATTENTION: Using any accessories or tools not recommended in this user's manual may increase the
risk of injury. Always use only original spare parts.
Clean the tool after the completion of every work task.
Do not use worn or damaged drill bits and drilling extension pieces. Such tools may overload the motor and
lower effectiveness.
Take proper care to prevent the motor from damage by oil or water.
Regularly check that the tool has not been damaged during the course of standard operation. Make sure that
all parts are correctly connected and do not use this product if any of its parts has been damaged or lost.
When inserting the battery into the charger, ensure that the battery is inserted in the correct manner and that
there are no materials between the battery contacts, e.g. soils.
The battery and the charger should be protected from heat and the sun. Do not expose these products to
extreme temperatures.
Do not use the device in an outdoor environment.
Use only the charger supplied with this tool.
If the product is damaged or malfunctions, contact an authorised service centre or the vendor.
Storage
Store the tool in a dry location at a suffi cient distance from heat sources or dangerous vapours.
Do not place any other items on the machine.