Fieldmann FDB 2005-E - Manual (Page 15)

EN
MULTI FUNCTION TOOL OPERATING INSTRUCTIONS
15 Installing sandpaper
5.2 INSTALLING SANDPAPER
1. Install the hook & loop sanding pad (1) onto the tool (Fig. 3)
2. Firmly press the sandpaper (2) onto the hook & loop pad.
Fig. 3
NOTE:
Place the sandpaper so the holes in the sandpaper line up with the matching holes in the hook & loop pad
Press the sandpaper firmly onto the hook & loop pad.
3. To remove the sandpaper, simply peel the sandpaper way from the hook & loop pad (Fig.4).
Fig. 4