Flintec ATEX - Manual (Page 7)

Instruction and Operation Manual
for ATEX Approved Load Cells
Last revision: 24.10.2014 Revision: 9.5 Page 7 / 12 Date of 1st issue: 03.06.2002
9. EC-Declaration of Conformity
EC-Declaration of conformity of a sub-assembly
with the ATEX-Directive 94/9/EC (ATEX95), Amendment X.B
The manufacturer
Flintec GmbH, Bemannsbruch 9, DE74909 Meckesheim
Hereby declares that the sub-assembly described below
Description: Load cells of types
PC1, PC2, PC2H PC6, PC12, PC22, PC42, PC46, PC60, PCB, SB2, SB4, SB5, SB6, SB8, SB14, SLB,
BK2, ZLB, RC1, RC2, RC3, UB1, UB5, UB6, ULB, BK2
Serial numbers see shipping documents
Marking:
II1G Ex ia IIC T6/T5 Ga or II1D Ex ia IIIC IP67 T100°C Da or 2G Ex ia IIC T6/T5 Gb or
II2D Ex ia IIIC IP67 T100°C Db or II 3G Ex nA IIC T6/T5 Gc or II3G Ex ic IIC T6/T5 Gc or
II 3D Ex tD IIIC IP67 T100°C Dc
Complies with the provisions of the following standards :
EN 60079-0:2011 Explosive atmospheres
Part 0: Equipment - General requirements
EN 60079-11:2012 Explosive atmospheres
Part 11: Equipment protection by intrinsic safety “i”
EN 60079-15:2011 Explosive atmospheres
Part 15: Equipment
protection by type of protection "n“
EN 60079-26:2007 Explosive atmospheres
Part 26: Equipment with equipment protection level (EPL) Ga
Also complies with the following European and National Standards and technical provisions in the version,
valid at signature date: Technical rules for the operational safety (TBRS) 2153 Avoidance of ignition
hazards as consequence of electrostatic charging.
The sub-assemblies of category 1 and 2 complies with the model, which has obtained an "EC" type
certificate, number BVS 09ATEX E 086X issued by the notified body 0158 DEKRA EXAM,
Dinnendahlstrasse 9, DE 44809 Bochum.
Flintec GmbH
Meckesheim, dated 03. March 2013
i.V. Gisbert Greulich
Project Manager