Flyzone FLZA6400 - Manual (Page 2)

flyzoneplanes.com
INSTALLATION OF THE AIRCORE MODULE
Refer to the instructions included with each airframe for
removal of the battery hatch.
Position the module so that the tab is in front of the
cradle retainer.
If any of the control surface pushrods do not connect, gently
move the control surfaces until the pushrods snap together.
BIND THE TRANSMITTER TO THE PLANE
IMPORTANT: Once the battery is connected to the ESC
the motor will start if the throttle stick is moved up.
Place the transmitter near the plane.
If the motor starts to beep rapidly, adjust the throttle
trim down.