Flyzone FLZA2062 - Manual (Page 11)

11
Repairs can be made to the Micro Tiger Moth by using the following items:
● Non-butane lighter fl uid “Naphtha” (for parts removal and debonding)
● Thick Foam Safe CA (for parts adhesion), GPMR6072
● Foam safe CA accelerator, GPMR6035
● Two sets of needle nose pliers or hemostats, HCAR0625
● Hobby Knife (#11 blade), RMXR6900
● Clear tape
● Hinge tape, DUBQ0916
REPAIRS
Stock No. Description
FLZA6102 Motor
FLZA6340 Wing
Set
FLZA6341 Fuselage
FLZA6342 Tail
Set
FLZA6343 Wing Strut Set
FLZA6344 Pushrod
Set
FLZA6345 Landing Gear
FLZA6346 Pilot
Stock No. Description
FLZA6347 Control
Horns
FLZA6348 Decal Set
FLZA6254 Propeller
FLZA6255 Gearbox
GPMP0760 LiPo Battery
TACJ2402 TTX402 2.4GHz Transmitter
TACL1424 TR424 Micro Rx with Servos
To order replacement parts for the Micro Tiger Moth, use the order numbers in the list below. Replacement parts are
available only as listed. Replacement parts are not available from Product Support, but can be purchased from hobby
shops or mail order/Internet order firms. If you need assistance locating a dealer to purchase parts from, contact:
Product Support
Phone: 217-398-0007
Fax: 217-398-7721
E-mail: [email protected]
REPLACEMENT PARTS
To replace or reinstall the propeller, unpower the
model, then hold the motor shaft with needlenose
pliers and push the propeller back onto the shaft.
Once re-installed, add a drop of CA glue to the
propeller to hold it to the shaft.
PROPELLER REPLACEMENT