Flyzone HCAA1990 User Manual
Page 3
UNPACKING THE BOX
Check the parts against the list below. If any parts are
damaged or missing, give us a call at: (217) 398-8970.
1. Transmitter Antenna
2. Transmitter
3. Aero Scout
4. Landing Gear
5. 4.8V 150mAh NiMH Battery
6. Spare Propeller
Preparing the Plane and Transmitter
1. Attach the landing gear by sliding the “U” bend
into the plastic retainer as shown.
2. Remove the battery cover on the bottom of the
transmitter and insert eight “AA” batteries following
the diagram on the battery cover.
3. Route the charge lead through the opening on
the transmitter as shown.
Transmitter Cautions:
• Do not use rechargeable (NiCd) batteries.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable (NiCd) batteries.
GET THE MODEL READY TO FLY
AIRFRAME PARTS AND HARDWARE
3
1
2
6
5
4
3