Futaba 4PKS 2.4GHz - Manual (Page 25)

25
B
e
for
e
Using
3
Pull out the wiring as far as possible from between the wheel unit and APA. Stow the
surplus pulled out wiring in the transmitter.
s"E
4
Install the assembled wheel unit and APA
to the transmitter using the screw supplied.
The APA mounting screws are in the hook
and APA mounting screws bag.
Verify the position of the transmitter bottom
holes by mounting angle. The screw used
depends on the position of the bottom hole.
Stow the surplus wiring here.
Transmitter bottom hole
*The figure below is an installation example.
Dummy screw
$UMMY
5SE
Steering wheel mounting screw
5
Install the steering wheel
using the screw.