Futaba 4PKS-R 2.4GHz - Manual (Page 31)

Receiver
Switch To Battery
Steering servo
Throttle servo
CH3 servo
CH4 servo
#%
$
31
In
stal
lation
Connect the receiver and servos as shown below. Connect and install the receiver and
servos in accordance with "Installation Safety Precautions" on the next page.
7KH¿JXUHVKRZQEHORZLVDQH[DPSOH7KHPHWKRGRIFRQQHFWLQJWKHPRWRUFRQWUROOHU
WRWKHPRWRUDQGEDWWHU\GHSHQGVRQWKHPRWRUFRQWUROOHUXVHG3XUFKDVHWKHPRWRUFRQ-
troller and servos separately. The receiver also depends on the set.
When using the DSC cord with a gasoline engine car, connect the optional double ex-
tension cord to B/C of the receiver and the DSC cord and receiver switch to the opposite
side connector.
Installation When An Electronic Speed Control Is Used
Installation For Gas Powered Models
Installation
Receiver and Servo Connections