Futaba 7C 2.4GHz - Manual (Page 19)

TRANSMITTER DISPLAYS & BUTTONS
When you first turn on your transmitter, a confirmation double beep sounds, and the screen shown below appears. Before
flying, or even starting the engine, be sure that the model type and name appearing on the display matches the model that
you are about to fly! If you are in the wrong model memory, servos may be reversed, and travels and trims will be wrong,
leading to an immediate crash.
Edit buttons and Start-up Screen (appears when system is first turned on):
M ODE /P AGE B UTTON : (key)
Press and hold M ODE B UTTON for one second to open programming menus. Press M ODE B UTTON to switch between
BASIC and ADVANCE menus. HELI only: Press M
ODE B UTTON
to scroll between conditions in certain functions.
E ND B UTTON : ( key)
Press E ND B UTTON to return to previous screen. Closes functions back to menus, closes menus to start-up screen.
S ELECT /C URSOR B UTTONS : ( key)
Press S ELECT /C URSOR B UTTON to scroll through and select the option to edit within a function.
Press S ELECT /C URSOR B UTTON to page up/page down within BASIC or ADVANCE menu.
Turn Dial:
Turn D
IAL
clockwise or counterclockwise to quickly scroll through functions within each menu.
Turn D IAL clockwise or counterclockwise to scroll through choices within an option of a function (for example, to
select which switch controls dual/triple rates).
Press Dial:
Press D
IAL
to select the actual function you wish to edit from the menu.
Press D IAL and hold one second to confirm major decisions, such as the decision to: select a different model from
memory, copy one model memory over another, trim reset, store channel position in FailSafe, change model type, reset
entire model. System will ask if you are sure.
Press D IAL again to accept change.
19
Mode
key
End
key
Rudder trim
display
Throttle trim
display
Elevator trim
display
Model
name
Model
number
Model
type
Aileron trim
display Select
keys
Battery voltage
Dial