Futaba 9VAP User Manual

Page 41

Advertising
background image

PITCH CONTROL MIXING

Variable pitch propellers allow more constant speed aerobatics by providing an airbrake ef-
fect (reverse pitch) and the ability to adjust the high pitch from the transmitter. CH3 is used

for throttle and CH8 for pitch control.

Setting Method

1) Select

the

EDIT

screen

and

move

the

cursor

to Line 2 with the

cursor key, then dis-

play the MIXING screen by pressing the

MIX program key. Move the cursor to the

2ND line with the

cursor key.

2) Press

the program

key.

To activate Throttle -> Pitch Mixing, press
the ACT program key. If the 3 -> 8 MIX
Switch is ON at that time, "ON" is display-
ed. If the 3 -> 8 MIX Switch is OFF, then

"OFF" is displayed. To deactivate mixing,
press the

program key.

4)

The Idle Trim Lever adjusts the engine speed

at full LOW (Reverse) pitch.

5)

The Pitch Trim Lever adjusts the full HIGH

pitch setting at high throttle stick position.

6) The

Idle

and

Pitch

trim rates determine the

amount of adjustment available with full
stroke of the trim lever.

7)

Move the cursor to the IDL and PIT TRIM

10) Move the cursor to the IDL and PIT DELY

position with the

and

cursor keys and set the amount of delay
with the or

program keys.

11) Set the throttle stick mixing point (point at

which the pitch servo moves from low to
high).
a) Move the cursor to the THR-POS line

positions with the or

cursor key.

Set the rates with the

, or

program key. Figures in ( ) represent the
total amount actually set.

8) The

Idle

Delay

provides an adjustable delay

in throttle servo movement to prevent the

engine from over-reving when the throttle
control stick is moved from LOW to HIGH.

9)

The Pitch Delay provides a slight delay in

pitch servo movement to prevent engine
over-reving as the control stick is move from
HIGH to LOW.

with the or

cursor key.

b) Set the throttle stick to the desired pitch

change position (2 to 3 detents above full

idle suqqested).

c) Press the key to memorize the pitch

chanqe position.

12) To return to the original MIXING screen,

press the

program key.

NOTE: PITCH-MIX is not available in

the

BASIC mixing mode.

Advertising