Futaba R603FS - Manual

R603FS Specifications
• Reception antenna: Diversity type (Two antennas: internal
and external)
• Power requirement: 6V Nicd battery
• DSC function available
• RS232C port: (for factory use only)
• Size: 39x26x14mm (excluding a projection part)
• Weight: 14.1g
(Specifications are subject to change without prior notice.)
R603FS
Futaba R603FS 3 channel FASST receiver is packed in this set.
1M23N17402 ©FUTABA CORPORATION 2008, 2 (1)
Compliance Information Statement (for U.S.A.)
This device, trade name Futaba Corporation of America, model number R603FS, complies
with part15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesiredoperation.
The responsible party of this device compliance is:
Futaba Service Center
3002 N Apollo Drive Suite 1, Champaign, IL 61822 U.S.A.
TEL (217)398-8970 or E-mail: [email protected] (Support)
TEL (217)398-0007 or E-mail: [email protected] (Service)
Connectors
3: CH3 servo (CH3)
2: Throttle servo (CH2)
1: Steering servo (CH1)
B/C: Power connector/DSC connector
RS232C: (for factory use only)
Antenna
(External) Antenna
(Internal)
Coaxial cable
R603FS
3-Channel FASST Receiver
* Keep the internal antenna away from conductive
materials,such as metal and carbon, motor, ESC, and
other noise sources as much as possible.