Futaba GV-1 - Manual (Page 41)

FUNCTIONS
Mixture trim MTrm
Set when you want to use a vacant volume channel to use the mixture servo
trim function. "INH" disables the mixture trim function. To use the trim func-
tion, set MTrm to "ACT" and connect the AUX (m.trim) connector to the
vacant channel you want to use.
Trim operates when the mixture servo is above the neutral position. Adjust
the trim servo travel with ATV of the transmitter AUX channel.
(Setting method)
1
Set the mode by pressing the
DATA+ or DATA- key.
(Initial value) INH
Functions priority
The "mixture trim" and "governor ON/OFF switch position setting" func-
tions cannot be active at the same time. Therefore, when activating the
"mixture trim" function, inhibit the "governor ON/OFF switch position
setting" function.
50%
Close
Open
Trim
deflection
Throttle
servo
Slow High