Philips CD 824 - Manual (Page 6)

OPERATION
DISPLAY (Fig. 3) PLAYBACK (PLAY/REPLAY)
-------------- Lights up when you switch the player
on.
PLAY DIRECT - Lights up when the player is set to
the direct play mode.
DIRECT PROGR Lights up when the player is set to
the direct programming mode.
8 c=> - Lights up when an 8-cm CD is loaded.
12 <j=D> - Lights up when a 12-cm CD is ioaded.
REVIEW - Lights up when you check a programme.
TRACK - Indicates;
- what track is being piayed;
- the number of tracks on the CD;
- the number of tracks in a programme.
REPEAT - Lights up when the entire CD or a
programme is repeated; flashes when a track is
repeated.
A-B - Lights up when a passage is repeated.
[> - Lights up during play; flashes when play is
interoipfed (PAUSE).
TRACK TIME - Indicates the elapsed playing time of
the track being played.
REM TRACK TIME - Indicates the remaining playing
time of the track being played.
TOTAL REM TIME - Indicates the remaining piaying
time of the CD or a programme.
TOTAL TIME - Indicates the total playing time of the
CD or a programme.
ERROR- Lights up if you;
- make an error in operating the player;
- try to start play when the CD is inserted with the
printed side facing down or if the CD is damaged.
EDIT - Lights up-when the player is set to the EDfT
mode.
RANDOM - Lights up when the tracks on the CD are
played in random order.
((CO - Lights up when the player receives a command
from the remote control.
DIG(ital) OUT ON - Ughts up when the DIG(ital) OUT
output is switched on.
DIG(ital) OUT OFF - Ughts up when the DIG(ital) OUT
output is switched off.
FTS MEMORY 1 or FTS MEMORY 2
- Rashes after the FTS 1 or FTS 2 key has been
pressed.
- Rashes after loading a CD which has an FTS
programme.
- Ughts up when a programme from the FTS
memory is played.
1-20 track number indicator - Shows the number of
tracks on the CD; + 20 lights up when there are more
than 20 tracks on the CD.
---- Ughts up when the tracks are played in random
order.
• Press ON/OFF to switch the player on.
• Open the CD compartment by pressing OPEfJ or
OPEN CLOSE (remote control).
• Insert a CD, printed side up (Fig. 4).
• Close the CD compartment by hand or by pressing
PLAY/REPL^Y.
- Z> and 8 c=5 or 12 light up and a moment
later play starts.
- The number indicator shows how many tracks are
on the CD; when a track has been played its
number disappears.
- The track being played is always shown under
TFiACK and its elapsed playing time is shown
under TRACK TIME.
- Play stops after the last track .
- The display shows the number of tracks and the
playing time of the CD (TOTAL TIME).
• Press ON/OFF to switch the player off.
CALLING UP OTHER TIME INFORMATION (TIME) * •
• Press TIME whenever you want to know the
remaining playing time of the track being played
(REM TRACK TIME).
• Press TIME again if you wish to know the remaining
playing time of the entire CD (TOTAL REM TIME).
• Press TIME again if you wish to return to the
elapsed playing time indication (TFIACK TIME).
GOING BACK TO THE BEGINNING OF A TRACK
(PLAY/REPLAY)________________________________________
• Press PLAY/REPLAY.
- The track starts again from the beginning.
SELECTING ANOTHER TRACK DURING PLAY
d-O')__________________________
• Key in the desired number (numbers consisting of
two figures must be keyed in within 2 seconds).
- The music stops and a moment later the selected
track begins to play.
You can also select the number by using NEXT or
PREVIOUS.
ERROR will light up if you select a non-existent
number.