Philips CD 840 - Manual (Page 10)

OTHER POSSIBILITIES
LISTENING WITH HEADPHONES (PHONES)
• Connect headphones with a 6.3 mm jack plug and an imped­
ance between 8 and 2000 ohms to the PHONES jack.
• The sound level is adjusted with the VOLUME control._________________________
PERSONAL PRESETS
Important!
- When setting allow no more than TsecondsXo elapse between
pressing the various buttons, otherwise DISC READYvj\\\ light
up again and the display will again show the number of tracks
and the playing time of the disc.
- As soon as you press STORE, the next function to be set will
automatically appear on the display. You must therefore store
the functions in the order in which they appear on the display.
- The settings will remain stored in the player’s memory, even if
you switch it off.
- You can set the following in this order:
The brightness of the display
• Press PRESETS.
> PP(= Personal Presets) lights up with above it SR/GHTWESS;
afterthis you will seethe level at which brightness has been set.
• Press <M CURSOR or CURSOR 1» until you obtain the desired
brightness.
• Press STORE.
> The brightness has now been set.
The play mode (AUTO)
Depending on what play mode you select, after switching on the
player or closing the tray by hand, play will automatically begin
with:
- the whole disc (AUTO-PLAY);
- the FTS 1 program of the disc (AUTO-FTS 1);
- the FTS 2 program of the disc (AUTO-FTS 2) or
- the tracks of the disc in a random order (AUTO-RANDOM).
If you select AUTO-STOP, then you must start play yourself with
PLAY/REPLAY, RANDOM or SCAN.
> AUTO-STOPlightsupabove ’PP’
• Press « CURSOR or CURSOR !» until the required play mode
appears on the display.
• Press STORE.
> The play mode has now been set._________________________________________
NAMING DISCS AND TRACK NUMBERS (TITLE)
Using the digit/alphabet buttons you can give all discs and track
numbers a ’name’.
A ’name’ can consist of a maximum of 12 characters (letters,
digits and/or symbols). Each button has marked on it what digit
and what letters can be entered with it. With button ’9’ you can
I. With button ’0’ you can enter the symbols I , + , enter a space (■.
<, -, >, _ and *.
Naming a disc
• Press TITLE.
> TITLE lights up.
> ’0’ appears under TRACK.
> The cursor begins to flash on the display.
• You can now enter the required ’name’; after each character
thatyou key in press CURSOR W> to pass on to the next position
on the display (with « CURSOR you return to the previous
position).
• Press STORE as soon as you have entered the complete
’name’.
> The ’name’ disappears and STORED lights up.
> The ’name’ appears again. The first character flashes; you can
still change the ’name’ if you wish.
• Press TITLE if there is nothing you wish to change.
> The ’name’ has now been stored in the permanent (FTS)
memory of the player.
Naming a track number
• Press TITLE.
> TITLE lights up.
> ’0’ appears under TRACK.
• Select the required number with NEXT or PREVIOUS.
> The number appears under TRACK.
• Now enter the ’name’ and store it using STORE.
Track numbers can still be named even if a ’name’ has already
been stored for the entire disc.
Note!
If NO SPACE lights up after you have pressed STORE, then the
memory is full: you will have to erase one or more ’names’ to make
space for the new one.____________________________________________________
CHANGING A ’NAME’
• Press TITLE.
> The ’name’ appears on the display; the first character flashes.
• Enter the new ’name’ and store it again using STORE.________________________
CHECKING THE TITLE MEMORY
• Press INFO.
> FTS/WFO lights up.
• Press NEXT until TITLE MEMORY appears on the display.
> You will now receive the information on the ’names’ entered.
You will see in succession: TITLE NR 1 followed by the ’name’,
TITLE NR 2to\\owed by the ’name’ etc.
If no names have been stored in the FTS memory, then NO
TITLE lights up.
With NEXT you can proceed more rapidiy to the next block of
information.
ERASING A ’NAME’
• Press INFO.
> FTS/WFO lights up.
• Press NEXT until the number of the name appears on the
display; for example TITLE NR 02.
• Hold CLEAR pressed down until DELETED lights up.
> The name has now been erased.