Philips VR800 - Manual (Page 11)

User guide (OSD)
□ Store: With the [W] button.
□ Confirm: With the menu button
□ Exit menu: With the IMENUI button.
Emergency interrupt
Important notes for operation
With OSD (On Screen Display) the corresponding functions
appear on the TV screen as a menu. The most important
button-functions are displayed at the bottom of the screen.
□ Call up the menu: With the llviENUl button.
□ Select a line: With the I PT I or I Pt I button.
□ Select within a line: With the menu buttons I •*- I or
□ Enter/Alter: With the I I or I-» I or with the [M] but­
ton.
□ You can switch on with the I stop B I button, the [M] but­
tons or by inserting a cassette.
□ Keep your video recorder connected to the mains at all
times to ensure that programmed recordings can be
made and thatthe television functions normally. The
power consumption required is less than 4W (saving
energy mode).
□ When the video recorder is disconnected from the
mains, TV channels will be strored typically 1 year, and
clock/timer data will be stored typically 7 hours.
Saving energy
You can choose between two methods of switching to
standby.
Normal method: Switch to standby using the I standby 0~l
button. The clock time remains displayed.
If the clock has not been s e t , a p p e a r s .
To save energy: Press the I standby OH button twice. The
clock time disappears from the display.
Both the video recorder and the remote control have an
'Emergency interrupt' button. You-can use the I standby 61
button to interrupt any function.
Whenever you have operating problems you can simply
interrupt the function and start again.
You can practise operating your set without any worries. No
matter which buttons you press, you cannot damage it.