Tape playback, Tape playback -23, Tape operation/recording – Philips FW-C500 User Manual
Page 44: Tape playback 1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Tape Operation/Recording
IMPORTANT!
- Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
- C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
- Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape Playback
1
Press ^ to open the tape deck door.
2
Insert a recorded tape and close the tape door
• Load the tape with the open side down and the
full spool to the left.
3
Press
TAPE
(TAPE 1 *2) repeatedly to select
tape deck 1 or tape deck
2.
The selected tape deck number is displayed.
4
Press
PLAY
►to start playback.
To stop playback
• Press ■.
22