Optical out / line out (not on all models), Connections, Rn connecting the remote control – Philips AZ 7394 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
rn Connecting the remote control
(supplied or optionally available)
3!'
AY 3764 cord remote control
AY 3765 LCD cord remote control
The buttons on the remote control have the same functions as the corresponding ones
on the CD player.
VOLUME:
to adjust the main volume that has been preset (position 8) with the
volume control on the CD player.
1 Switch off the CD player (press STOP ■ twice).
2 Connect the remote control firmly to the LINE OUT/REMOTE ii jack of the CD
player.
Optical Out / Line Out (not on all models)
1 Connect the set to an external power source.
2 Turn down the volume of your stereo system.
3 Connect the (optical) signal lead (supplied or
optionally available) to the OPTICAL OLTT/
LINE OUT socket of the CD player and to the
DIGITAL IN (OPTICAL) / AUX socket of the
other set (amplifier, digital cassette deck etc.).
4 Adjust the sound with the controls of the stereo system.
Note: A connection at OPTICAL OUT deactivates ESA/PSM.
-► Display indication: L iflE
10