Clock, Setting clock/alarm time – Philips AQ 6549/00 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clock
SETTING CLOCK/ALARM TIME
• Set RADIO/TAPE to TAPE.
• Press MODE to select the desired display.
- Each time you press MODE the display will show:
(The Display will return to Clock Display if left in
either Alarm Time Set or Clock Time Set mode for
longer than 10 seconds.)
• When the display is blinking, use HOUR/5 and
MIN/ £ to adjust time.
- Pressing continuously will advance the hour and
minutes more quickly.
• When you are finished, press MODE to return to
Clock Display.
ALARM
Set the Alarm Time, as described in 'Setting
Clock/Alarm Time'.
• Return to Clock Display; then, press ALARM
ON/OFF.
- 'ALARM ON' indicator is displayed.
- The alarm will sound at preset time.
- The alarm will sound for 10 minutes, then
stops automatically.
Note: The alarm cannot be heard through
headphones.
• Press ALARM STOP to stop the alarm.
- The alarm will sound again in 24 hours.
• Press ALARM ON/OFF to turn off the alarm
entirely and the indicator will go out.