How то use the ашюа^шео input jacks (contmuep), How то u – Philips TP3267C User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
о
How то U
se
the
А
шю
А^
шео
I
nput
J
acks
(C
ontmuep
)
<l>
r
bu can view the playback of
VCR tapes (Video Disc
Players, camcorders, etc), by
using the A UDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play
back of a VCR tape:
[BECSINl
Connect the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
<l>
Press the MENU (M) button
on the remote, then press the
MENU
A
or
T
buttons to select
the word INPUT with the TV^s
on-screen arrow.
Note: You can press the CHAN
NEL
AY
buttons to select
“VCR/AUX” (if it has been
added to the TV’s channel mem
ory.) See page 7 for details.
Press the (+) button to select
the VCRyAUX(iliary) INPUTS
on the rear of the TV.
<J> Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
\ ' / S
mart
H
elp
Remember» when you're
” through using the PJV
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 8СЮ 292-6066) to con
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM PLAY
BACK OF VCR TAPE
sT=s=e
SAP
SSUiiDtHASS
SPEAKER
DlHPUT
CA3LE
RCAPHONO PLUG
CABLES (NOTSUP-
PUED)
AUDIO IN
(REDAVHITE)
—сшн—
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT JACKS)
NOTE: THE ”TV/VCR" BUTTON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELL AS SELECT CHANNELS
3 0R4.)
20