Philips AZ 6801 - Manual (Page 6)

PROGRAMMING MAINTENANCE
PROGRAMMING TRACK NUMBERS____________
You may select a number of tracks and store these
in the memory in the desired sequence. When
playing, you will only hear the stored titles in the
selected sequence. At most, 26 tracks can be stored
in the memory. You may store each track more than
once.
Manual selecting
• Load the disc, but do not press PLAY > yet.
• Select the desired track using the buttons 1«1 and
»1 until the display shows the required track number.
• Store this track by pressing STORE.
• Select and store in this way all desired titles.
Storing during INTROSCAN
• Press INTROSCAN to play the first few seconds of
each track.
• Press STORE as soon as you recognize a desired
title.
Storing during PLAY
• During normai PLAY you may store the running title
by pressing STORE.
-After pressing STORE the character 'F
(PROGRAM) appears, indicating that the track has
been stored.
- Store all desired titles in the required sequence.
You may store each track more than once.
- At most, 26 tracks can be stored in the memory.
When the memory is full, the character ’F (FULL)
appears.
-When pressing MEMORY, the display will show in
sequence all stored track numbers.
-You can simply erase the whole memory by
pressing CLEAR: the character ’C’ for CLEAR
appears now.
The contents of the memory are also erased:
- by opening the disc cover using OPEN;
- by setting the ON/OFF selector to OFF;
- if the batteries get exhausted or if the power
supply is interrupted in another way.
How to play the stored selection
To play your selection, the CD-player should be in
position STOP; then press PLAY >; now, the word
MEMORY appears.
GENERAL MAINTENANCE
-The mechanism of the CD-player is fitted with
self-lubricating bearings and therefore must not be
oiled or greased.
- Fingerprints, dust and dirt on the apparatus can be
removed using a soft, clean and slightly damp
leather cloth. Do not use any cleaning agents which
contain abrasives or solvents such as benzine
thinner, alcohol, refined petrol or ammonia, since
they may affect and harm the cabinet.
- Do not expose the set, batteries or discs to rain or
moisture, or, for any great length of time, to excessive
heat from heating equipment or direct sunshine, e.g.
in cars parked in the sun,
- Keep the set and the discs away from sand
CD-PLAYER AND DISCS
-The lens © (fig. 5) should never be cleaned.
-The lens may steam up when the set is taken from
a cold into a warm environment. Playing a disc is not
possible then. Do not clean the lens, but let the set
acclimatize for a while.
-Always pick up the disc by the edge (fig. 3) and put
it back in its box immediately after use.
- To remove dirt from a disc, first breathe on the disc
and wipe it off in a straight line from centre to edge
(fig. 6) using a soft, lint-free cloth. The use of cleaning
agents may harm the disc.
This product complies with the radio interierence
requirements of the European Community.
The type plate is located on the base of the set