FXpansion GURU 1.5 MIDI implementation - Manual (Page 8)

8
Channel 12 MIDI CC assignments
Edit Scopes: Latching (L) and Momentary (M)
Edit Scopes are used as modifiers allowing you to edit parameters across all layers on the current pad, all pads in the current group
and all pads in the current engine.
Momentary and latching control are provided for Edit Scopes.
Momentary controls must be held down while you adjust a control in order to operate. When the note is released, the Edit Scope
returns to normal – layer only.
Latching controls do not require you to hold down the MIDI note for the Edit Scope to operate. Play the note once to activate the
Edit Scope, and again to return to the previous Scope. Alternatively, enter another Edit Scope by playing its Latching MIDI note.
As well as being MIDI-controllable via MIDI keys 5-11 (F-2 to B-2), the Edit Scope can be changed between Latching values via
MIDI CC #16. The following table shows the CC values for each Scope (CC control for Momentary operation is not possible).
note no. note MIDI CC #16 value
5 F layer only (L) 0...31
6 F# all layers (M)
7 G all layers (L) 32...64
8 G# all in colour (M)
9 A all in colour (L) 65...96
10 A# all in engine (M)
11 B all in engine (L) 97...128
MIDI CCs on channel 12
F-2 to B-2 : Edit Scopes
Edit current
layer (L)
F-2 F#-2
(M)
G-2
(L)
Edit all layers on
current Pad
G#-2
(M)
A-2
(L)
Edit all Pads in
current Group
A#-2
(M)
B-2
(L)
Edit all Pads in
current Engine
16 Edit Scope select (see above)
33 Gain
34 Pan
35 Tune
36 Fine
37 Cutoff
38 Rez
39 Type
40 Amp_Env_Attack
41 Amp_Env_Hold
42 Amp_Env_Release
43 FX_Env_Attack
44 FX_Env_Hold
45 FX_Env_Release
46 FX_Env_Cutoff_Send
47 FX_Env_Pitch_Send
48 FX_Number
49 Param_1
50 Param_2
Note: most parameters can also be controlled via NRPN.
51 Direct_FX
52 Aux_Send_1
53 Aux_Send_2
54 Aux_Send_3
55 Hidden Normalize
56 Playback Mode
57 PreDelay Ms
58 PreDelay Ticks
59 PreDelay Units
60 Layer Mute
61 Layer Solo
78 Current pad/layer sample start point
79 Current pad/layer sample end point