Char-Broil 463821909 - Manual (Page 18)

18
3
4
A Place bottom of front panel into three slots in the bottom shelf.
B Attach front panel to legs with four #10-24x2" machine screws and #10-24 flange nuts.
Place valve/hose/regulator onto control panel. Attach with machine screws. NOTE: Make sure the two valve
stems are centered in their clearance holes; otherwise, this can cause main burner level problems.
NOTE: if your grill come with Snap-in ignitor, please see Option.
#10-24 x ½”
Attach ignitor to control
panel using the stamped nut that's provided.
#10-24 Flange Nut
Qty.4
#10-24 X 2”
Machine Screw
Qty.4
Back of Cart
#10-24 x ½”
Machine Screw
Qty.2
Valve/Hose/Regulator
Ignitor
Snap-in
Ignitor
Valve/Hose/Regulator
Option:
Snap the
ignitor into the control
panel.
Stamped Nut