Char-Broil 463821909 - Manual (Page 20)

7
A Attach tool holder to front leg using two #10-24x2" machine screws and #10-24 flange nuts. Place sideburner pan into frame and
attach with a
#10-24x2" carriage bolt and #10-24 metal wing nut in back and a T-wing screw in front.
B Attach sideburner valve cup. Place sideburner into hole. Make sure side burner valve is inside sideburner tube. Fasten sideburner
with a wing nut. Attach sideburner ignitor wire to ignitor.
C Place sideburner knob and grate.
Sideburner
Sideburner
Valve
Cup
Sideburner Grate
Sideburner
Knob
B
C
B
#10-24 X 2”
Machine Screw
Qty. 2
#10-24
Metal Wing Nut
Qty. 1
#10-24
T-Wing Screw
Qty: 1
Correctly assembled valve in sideburner tube
Tool
Holder
Sideburner Frame
Metal
Wing Nut
Flange Nut
T-Wing
Screw
Sideburner Pan
#10-24x2" Carriage Bolt
#10-24x2"
Machine Screw
#10-24x2”
Carriage Bolts
Qty: 1
#10-24
Flange Nut
Qty: 2
Sideburner Clip
Qty: 1
20
Sideburner
Ignitor Wire Sideburner
Clip