GIN Genie Race 3 - Manual (Page 30)

30
WARNING: Be sure to follow the
attachment instructions carefully.
Improper installation could cause
the webbing to burn leading to a
fatal accident. Connecting the rescue bridles to the harness webbing
The Genie Race 3 can be used with the new Soft Shackle carabiner. You may also choose to use a
Maillon Rapid type 7mm Stainless Steel carre (square). But in any case, the connector should be
rated at least 9 times the maximum weight. Our recommended 7mm connector for example has a
minimum breaking load of 3125kg and an EN certificate of conformity.
Be sure to inspect the connector during normal maintenance and safety checks. Replace after
any use of the reserve or signs of wear. We recommend that you cover the connection using the
Maillon rapid cover, tape, or heat shrink wrap to prevent the connections from moving.
Follow the attachment procedure provided in this manual.