GIN Genie Race 3 - Manual (Page 8)

Introducing the Genie Race 3
The Genie Race 3 has been redesigned from the cocoon up to the aerocone. Every detail was assessed to
generate the most aerodynamic harness on the market. A new nose design creates a wrinkle and drag free
leading edge to cut through the air. The new cocoon took months of development to create the perfect
shape and structure. We used new neoprene fabric to reduce drag and increase the longevity of the
harness while also supporting the weight of the flight deck to remove pressure from your legs in flight.
The seat has a new, more comfortable, and more ergonomic shape to help the pilot achieve the most
efficient flying position. To make the harness lighter and easier to use we have incorporated newer and
fewer buckles. To make it safer we designed it with the T-buckle system to prevent the pilot from
accidentally launching without the leg buckle attachments.
One of the main goals behind the new design was to incorporate a second rescue into the cocoon. In
extreme situations with high G-force restricting you from reaching your main rescue, the front deploying
rescue will be your safest option. Not only is it located in the most convenient location but we also
wanted to give the pilot more options in the event of an emergency, you now have a right and left side
handle. Now you can choose the safest side to throw to avoid line entanglement.
The all new aerocone has been modeled from a formula 1 race car. The shape perfectly mimics the
outline of the pilots head and shoulders to greatly reduce turbulent airflow. A new internal structure was
created to allow for better aerocone inflation and shape retention. We even implemented new titanium
wire to add rigidity and optimize airflow.
We truly went the extra mile to ensure you get the best flying performance.
8