GIN Verso - Manual (Page 14)

14
To install the optional quick release footstrap, wrap the webbing of the footstrap around the
D-ring. Ensure that the 2 rings line up with each other and that the cord loop is pushed through the
rings. Route the long yellow plastic line through the neoprene tunnel, velcro strap at the end of
the seat, and the cord loop that is protruding through the footstrap rings. Finally, tuck the plastic
line into the neoprene cover of the footstrap.
If the plastic line is too long, trim it to fit your leg.
1
2
3
4
5