GIN Verso - Manual (Page 21)

21
13
IInstalling the rescue in the harness rescue compartment
Using the line, pull the elastic loops through the ring of each rescue container flap. Close the rescue
container flaps in the order shown in sequence of photos below. Secure the rescue container flaps by
placing the release pins through the elastic loops as shown. Insert each side of the rescue handle in
neoprene and secure with the attached Velcro.
If using the optional footbar, the dedicated rescue handle with longer plastic wire has to be used.
Connect the long plastic wire to the quick-release footbar mechanism as detailed in the instructions
in the "Assembly" section.
1
3
5
6
7
8
4
2
9
10
11