Caution – GMC 2004 Canyon User Manual

Page 356

Advertising
background image

11. Remove the jack handle and insert the hoist end of

the extension through the hole in the rear bumper.

Turn the wheel counterclockwise one turn or
until the wheel retainer assembly falls out.

12. Reinsert the jack handle into the jack. Lower the

jack by turning the wheel wrench counterclockwise.
Keep lowering the jack until the spare tire slides
off the jack or is hanging by the cable.

{

CAUTION:

Someone standing too close during the
procedure could be injured by the jack. If the
spare tire does not slide off the jack completely,
make sure no one is behind you or on either
side of you as you pull the jack out from the
spare.

13. Disconnect the jack handle from the jack and

carefully remove the jack. Use one hand to push
against the spare while firmly pulling the jack out
from under the spare tire with the other hand.

If the spare tire is hanging from the cable, insert the
hoist handle, extension and wheel wrench into the
hoist shaft hole in the bumper and turn the wheel
wrench counterclockwise to lower the spare the rest
of the way.

5-92

Advertising