Speedometer and odometer, Trip odometer, Engine hour meter display – GMC 2001 Sierra User Manual

Page 166: Tachometer, Notice

Advertising
background image

2-83

Your instrument cluster is designed to let you know at a
glance how your vehicle is running. You’ll know how
fast you’re going, about how much fuel you have and
many other things you’ll need to know to drive safely
and economically.

Speedometer and Odometer

Your speedometer lets you see your speed in both miles
per hour (mph) and kilometers per hour (km/h). Your
odometer shows how far your vehicle has been driven,
in either miles (used in the United States) or
kilometers (used in Canada).

Trip Odometer

The trip odometer can tell you how far your vehicle has
been driven since you last set the trip odometer to zero.

Press the reset button to toggle between the trip
odometer and the regular odometer. Holding the reset
button for two seconds while the trip odometer is
displayed will reset it.

To display the odometer reading with the ignition off,
press the reset button.

Engine Hour Meter Display

The odometer can also display the number of hours the
engine has run. To display the hour meter, turn the
ignition off, press and hold the reset button for at least
four seconds. The hour meter will be displayed for up to
30 seconds, or until the ignition is turned on.

Tachometer

Your tachometer displays the engine speed in
revolutions per minute (rpm).

NOTICE:

On vehicles with a manual transmission, if you
operate the engine with the tachometer in the
red area, your engine or other parts could
be damaged.

Damage to your engine or vehicle caused by
operating the engine in the red area isn’t covered
by your vehicle warranty. Don’t operate the
engine with the tachometer in the red area.

Advertising