GMC 2001 Sierra User Manual

Page 233

Advertising
background image

4-11

To turn the system on
or off press the TAS
on/off button located
to the left of the of the
steering wheel on the
instrument panel.

If you used the button to turn the system off, the
TRACTION OFF light will come on and stay on. You
can turn the system back on at any time by pressing the
button again. The TRACTION OFF light should go off.

If desired, you can change the TAS automatic
engagement feature so that the system will not come
on automatically when the engine is started. To do so:

1. Park vehicle with ignition off and transmission

in PARK (P).

2. Turn the ignition to RUN; do not start the engine.

3. Apply the brake pedal, press the accelerator pedal to

the floor and then press the TAS on/off button and
hold it down for at least six seconds.

4. Release the TAS button and both pedals.

5. Turn off the ignition and wait a few seconds.

The next time you start your vehicle, the TAS will not
automatically come on. You can restore the automatic
feature by using the same procedure. Whether the TAS is
set to come on automatically or not, you can always turn
the system on or off by pressing the TAS on/off button.

Advertising