Cobra Electronics 75 WX ST - Manual (Page 6)

11
INSTALLING
MICROPHONE
HANGER
1. Hold microphone hanger
in location desired for
mounting. Make certain
that nothing will interfere
with the hanger’s
installation.
2. Mark the location for the
three mounting screws
(screws included).
3. Drill and mount
microphone hanger.
INSTALLATION
MICROPHONE HANGER
10
INSTALLATION
CB ANTENNA
CB ANTENNA INSTALLATION
For the most reliable operation and
maximum range, Cobra recommends
using a vertically polarized, quarter wave
length whip antenna (illustration A).
Shorter, loaded-type whips are adequate
when maximum range is not required
(illustration B).
NOTE: Mobile installations (cars, trucks,
boats, etc) should be made only with a
non-directional antenna system.
• A standard antenna connector
(Type SO-239) is provided on the
Connector Box for easy connection to
a standard PL-259 cable termination.
• Cobra antenna models are
recommended; see your local CB dealer
or order directly from Cobra. See order
form on page 40.
• For maximum efficiency in boat
installations, a ground plate is required,
unless the vessel has a steel hull. Consult
your CB dealer for information regarding
an adequate grounding system.
A
B