Great Planes Yak-55M 50-55cc Sport / 3D ARF - GPMA1230 - Manual (Page 5)

5
● The Yak-55M is factory-covered with Top Flite ® MonoKote ®
fi lm. Should repairs ever be required, MonoKote can be
patched with additional MonoKote purchased separately.
MonoKote is packaged in six-foot rolls, but some hobby
shops also sell it by the foot. If only a small piece of MonoKote
is needed for a minor patch, perhaps a fellow modeler
would give you some. MonoKote is applied with a model
airplane covering iron, but in an emergency a regular iron
could be used. A roll of MonoKote includes full instructions
for application. Following are the colors used on this model
and order numbers for six foot rolls.
True Red (TOPQ0227) Black (TOPQ0208)
Jet White (TOPQ0204) Metallic Platinum (TOPQ0408)
KIT INSPECTION
Before starting to build, take an inventory of this kit to make
sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not
of acceptable quality, or if you need assistance with assembly,
contact
Product Support . When reporting defective or missing
parts, use the part names exactly as they are written in the
Kit Contents list.
Great Planes Product Support
3002 N Apollo Drive, Suite 1 Ph: (217) 398-8970, ext. 5
Champaign, IL 61822 Fax: (217) 398-7721
E-mail: [email protected]
KIT CONTENTS
1. Fuselage
2. Cowl
3. Canopy
4. Stabilizers with Elevators
5. Tail Wheel Assembly
6. Rudder
7. Stabilizer Tubes
8. Fuel Tank
9. Wheel Spats
10. Wheels
11. Landing Gear
12. Dummy Engine
13. Right Wing
14. Left Wing
15. Wing Tube
1
6
2
4
9
10
11
12
13 14
15
8
7
3
5