Great Planes Yak-55M 50-55cc Sport / 3D ARF - GPMA1230 - Manual (Page 6)

6
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes Yak-55M ARF are
available using the order numbers in the
Replacement Parts
List that follows. The fastest, most economical service can be
provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Great Planes web site at
www.greatplanes.com. Select “Where to Buy” in the menu
across the top of the page and follow the instructions provided
to locate a U.S., Canadian or International dealer.
Parts may also be ordered directly from Hobby Services by
calling (217) 398-0007, or via facsimile at (217) 398-7721, but
full retail prices and shipping and handling charges will apply.
Illinois and Nevada residents will also be charged sales tax. If
ordering via fax, include a Visa
® or MasterCard ® number and
expiration date for payment.
Mail parts orders Hobby Services
and payments 3002 N Apollo Drive, Suite 1
by personal check to: Champaign IL 61822
Be certain to specify the order number exactly as listed in the
Replacement Parts List . Payment by credit card or personal
check only; no C.O.D.
If additional assistance is required for any reason contact
Product Support
by e-mail at [email protected]
or by telephone at (217) 398-8970
Order No. Description
REPLACEMENT PARTS LIST
GPMA4050 Fuselage
GPMA4051 Wing
GPMA4052 Horizontal
Stabilizers
GPMA4053 Rudder
GPMA4054 Cowl
GPMA4055 Landing
Gear
GPMA4056 Gear Spats
GPMA4057 Canopy
GPMA4058 Canopy
Hatch
GPMA4059 Tail Wheel Assembly
GPMA4060 Decals
GPMA4061 Wing
Joiner Tube
PREPARATIONS
❏
1. If you have not done so already, remove the major
parts of the kit from the box and inspect for damage. If any
parts are damaged or missing, contact Product Support at
the address or telephone number listed in the “Kit Inspection”
section on page 5.
❏
2. Use a covering iron with a covering sock on high heat
to tighten the covering if necessary. Do this for all of the
components of the model. Apply pressure over sheeted areas
to
thoroughly bond the covering to the wood.
ASSEMBLE THE WING
Note: Throughout this instruction manual you will be instructed
to use screws to secure different parts. In all cases, whenever
a screw is threaded into wood sheeting or wood blocks, we
recommend that you install the screw and then remove it. Apply
a drop of thin CA glue into the hole to harden the threads. After
the glue has hardened, re-install the screw. Following this
step will insure that you have a solid thread for your screws.
Whenever a screw is threaded into a blind nut or a nut is
installed onto a screw, it is recommended that you always
apply a drop of thread locker to them.
Begin with your right wing panel fi rst so your assembly
matches the photos in the manual.
❏ ❏
1. Install a 12" [305mm] servo extension to your aileron
servo. Secure it with heat shrink tubing, tape or other method
for securing them together.