Great Planes Pete 'n Poke 40 Kit - GPMA0493 - Manual (Page 3)

Remember: Take your time and follow the instructions
to end up with a well-built model that is straight
and true.
Before starting to build, compare the parts in this kit
with the Parts List, and note any missing parts. Also
inspect all parts to make sure they are of acceptable
quality. If any parts are missing, broken or defective, or
if you have any questions about building or flying this
airplane, please call us at (217) 398-8970, or e-mail us at
[email protected]. If you are contacting
us for replacement parts, please be sure to provide the
full kit name (Pete ‘n Poke Sport 40) and the part
numbers as listed in the Parts List.
You can also check our web site at www.greatplanes.com
for the latest Pete ‘n Poke Sport 40 updates.
If you’re not already an Academy of Model Aeronautics
(AMA) member, we strongly urge you to join. There are over
2,500 AMA chartered clubs across the country. Among other
benefits, the AMA provides insurance to its members who fly
at sanctioned sites and events. Additionally, training
programs and instructors are available at AMA club sites to
help you get started the right way. Contact the AMA at the
address or toll-free phone number below:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302-9252
Tele. (800) 435-9262
Fax (765) 741-0057
Or via the Internet at:
http://www.modelaircraft.org
This is the list of hardware and accessories required to finish
the Pete ‘n Poke Sport 40. Order numbers are provided in
parentheses for your convenience.
❏
4-Channel radio with five servos
❏
.32 to .46 two-stroke engine -or-
❏
.40 to .52 four-stroke engine
❏
Propellers recommended by the engine manufacturer
❏
(2) Hobbico ® 6" extension cords for aileron servos
(HCAM2000)
❏
Futaba ® AEC-13 Dual extension cord (FUTM4130)
❏
10 oz. Fuel tank (GPMQ4104)
❏
Medium fuel tubing (GPMQ4131)
❏
(2) 3" Main wheels (GPMQ4225)
❏
1" Tail wheel (GPMQ4241)
❏
(4) 3/16" Wheel collars (GPMQ4308)
❏
(1) 3/32" Wheel collars (GPMQ4302)
❏
2-1/2" Spinner (white - GPMQ4520)
❏
(2) Rolls of covering film
❏
One or two 1/5 Scale pilots (WBRQ2477)
❏
R/C foam rubber (1/4" - HCAQ1000, or 1/2" - HCAQ1050)
In addition to common household tools (screwdrivers, drill,
etc.), this is the “short list” of the most important items
required to build the Pete ‘n Poke. We recommend Great
Planes Pro
™ CA and Epoxy glue.
❏
2 oz. Thin Pro CA (GPMR6003)
❏
2 oz. Medium Pro CA+ (GPMR6009)
❏
CA applicator tips (GPMR6033, qty. 5)
❏
30-minute epoxy (GPMR6047)
❏
3M 75 Repositionable spray adhesive (MMMR1900) -or-
❏
3M 77 Super spray adhesive (MMMR1990)
❏
Cigarette lighter fluid (to remove spray adhesive)
❏
Hobby knife (HCAR0105)
❏
#11 blades (HCAR0211)
❏
Medium T-pins
❏
Great Planes Plan Protector (GPMR6167) or wax paper
❏
Drill bits: 1/16", 3/32", 1/8", 9/64" (or 1/8"), #8 (or
3/16"), 3/16", 1/4"
❏
#7 drill and 1/4-20 tap (GPMR8105)
❏
36" Straightedge (HCAR0475)
❏
Sanding tools and sandpaper assortment
This is a list of optional tools and accessories mentioned in
the manual that will help you build your Pete ‘n Poke.
❏
Epoxy Brushes (GPMR8060)
❏
Mixing Sticks (GPMR8055)
❏
6-Minute Epoxy (GPMR6045)
❏
Milled Fiberglass (GPMR6165)
❏
Microballoons (TOPR1090)
❏
CA accelerator (GPMR6034)
❏
R/C-56 Canopy Glue (JOZR5007)
❏
Rubbing Alcohol (for epoxy clean up)
❏
Great Planes Precision Hinge Marking Tool
(GPMR4005)
❏
Non-elastic monofilament or Kevlar fishing line (for
stab alignment)
❏
Builder’s Triangle Set (HCAR0480) (for fin alignment)
❏
Great Planes Slot Machine ™ Motorized Hinge
Slotting Tool (GPMR4010)
Optional Supplies & Tools
Adhesives & Building Supplies
Hardware & Accessories
ADDITIONAL ITEMS REQUIRED
Note: We, as the kit manufacturer, provide you with a top
quality kit and great instructions, but ultimately the
quality of your finished model depends on how you build
it; therefore, we cannot in any way guarantee the
performance of your completed model,
and no
representations are expressed or implied as to the
performance or safety of your completed model.
3