Great Planes Super Stearman EP ARF - GPMA1150 - Manual (Page 17)

17
❏
3. These pictures show how the cabanes look when they
have been properly installed.
❏
4. Attach the top wing to the cabanes with four 2-56 x 3/8"
[9.5mm] machine screws. Be sure to use a couple of drops
of thread locker on each of the screws before installing them.
❏
5, Bolt the bottom wing to the fuselage with two 4-40 x 1"
wing bolts and #4 fl at washers.
❏
6. Apply RC Z 56 glue to the bottom edge of the wing fairing.
Position the fairing on the wing. Wipe away any excess glue
and then tape the fairing in place.
❏
7. Locate the plywood strut attachment tabs. Cut all eight
tabs from the tree.