C&H Technologies M360 - Manual

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
Transceiver Characteristics:
Type: PCA82C250T
TTL signals: TX0
(on I/O connector) TX1
RX0
RX1
Controller: SJA1000
CANbus support: Rev. 2.0a
Rev. 2.0b
Front Panel Indicators:
Two LEDs: User Programmable
Status
Full Interrupt Capabilities
Isolation: Opto-isolation
devices ship with M360
M Module Compliance
Complies with ANSI/VITA Std 12-
1996 for single-wide M Modules.
Data Transfers 16 bit
Interrupts INTA
IDENT Implemented
Compatible with VXI, VME, PCI,
PXI, CPCI & Ethernet Carriers
Applications
• Automotive CAN interfacing
• Industrial Control
Ordering Information
Part Number 11029690-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at www.chtech.com.
Specifications:
Serial Port Characteristics:
Data Rates: Up to 1 Mbps
Clock Frequency: Programmable
Identifier Fields: Standard (11 bit)
and Extended (29 bit) supported
CAN access priority: Determined
by message identifier
I/O Buffer Memory:
TX: 64 bytes (2 CAN messages)
RX 10 bytes
Connectors: 9 pin DSUB
(Female)
Temperature:
Operating: 0°C to 60°C
Storage: -20°C to 70°C
Power: +5V @ 0.175 A
M360
CAN bus
Controller
M Module
The M360 CAN bus Controller is an
integrated standalone controller for
the Controller Area Network (CAN)
with an M Module interface. CAN is
used within the automotive and
general industrial environments. The
M360 contains all necessary
hardware for high performance
serial network communications. It
performs all the functions of the
physical and data link layers.