C&H Technologies PX454S - Manual

Rev. A
C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
Resolution:
10 Hz sampling: 22.5 bits
50/60 Hz sampling: 20 bits
1 KHz sampling: 11 bits
Input Connector: 5W5S DSUB
Airflow (min): 10m 3 /h
Temperature:
Operating: 0°C to 60°C
Storage: -20°C to 70°C
Power: +5V @ 1.1 A with DC/DC
CPCI/PXI Compliance
Complies with PCI spec. 2.0 R3.0
and PCI spec 2.2
5V and 3.3V signaling voltage (VIO)
supported
5V only power supply
33MHz PCI data bus
Five trigger lines compliant with PXI
Specification 2.1
Form Factor: Size 3U
Applications
• DMM Instrument Functions
• Factory Test
Ordering Information
Part Number 11030230-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at
www.chtech.com .
Specifications:
General Characteristics:
• DC or AC voltage and current
• 2 or 4 wire resistance measurement
• Up to 22 bits accuracy (6.5 digits)
• Max. resolution of 50nV, 5nA, 50_Ω
• DC Voltage: ±125 mV to ±500V
• DC Current: ±12.5mA to ±2.5A
• AC V
rms
: 250mV to 250V
• AC I
rms
: 25mA to 2.5A
• Ohms: 0 to 250Ω to 2.5MΩ
• True RMS measurements
• Auto calibration
PX454S
Digital
Multimeter
Module
The PX454S is a full function DMM
suitable for use on a variety of
platforms with the family of C&H
carriers. This DMM is based upon a
24 bit Sigma-Delta A/D converter
with on-chip notch filter. This
t e c h n o l o g y
a l l o w s s a m p l i n g
frequencies (or filter frequencies)
between 10 Hz and 1 KHz providing
varying resolutions.
The core
measurement section is optically
isolated and shielded.
This unit also features a position for
adding one single-wide M-Module.