Heli-Max HMXE14 Quick Start User Manual

Quick start checklist

Advertising
background image

WARNING!! The instruction manual must be read completely before operating
the Comanche CX.
It contains specifi c warnings about safety and use of the LiPo

fl ight battery supplied with the Comanche CX. All of these warnings and safety steps must
be read and understood before proceeding to the next step.

nual

must

be

read completely before operating

QUICK START
CHECKLIST

1.

Plug the charger into an AC outlet.

The indicator light on the charger should
illuminate solid green.

Plug the battery into the charger and the
indicator light will turn red. Once the charge
process is complete the indicator light will
turn green again. The charging process may
take up to four hours.

2.

Install eight (8) “AA” batteries into

the battery box. Check the polarity of
each battery.

3.

Always turn the transmitter on fi rst and

then extend the transmitter antenna.

4.

With the Comanche CX sitting still on

its side, plug the battery into the E-Board.
The Comanche CX will need to sit still for
10 seconds so the gyro can initialize and
determine center. If the Comanche CX is
moved during this initialization, the gyro will
not operate properly.

Advertising