HONDA 2015 Odyssey - Owner's Guide (Revised 09/24/2014) - Manual (Page 28)

48 | | 49
VEHICLE CONTROLS VEHICLE CONTROLS
Folding button*
Adjustment switch
Selector
switch
*if equipped
Adjusting the Mirrors
Adjust the angle of the mirrors for the best visibility when you are sitting in the
correct driving position.
Rearview Mirror with Day/Night Positions*
Manually adjust the position to reduce headlight
glare from vehicles behind you. Flip the tab to switch
between day and night positions.
Automatic Dimming Rearview Mirror*
When driving after dark, the automatic dimming
function reduces the glare from headlights behind
you.
A green indicator appears when automatic dimming
is on. The function cancels when the shift lever is in
Reverse (R).
Power Door Mirrors
Adjust the power door mirrors when the vehicle is on.
L/R selector switch: Select the left or right mirror.
After adjusting the mirror, return the switch to the
center position.
Mirror position adjustment switch: Press the switch
left, right, up, or down to move the mirror.
Folding door mirror button*: Press to fold the door
mirrors in or out.
Reverse Tilt Door Mirrors*
Either side door mirror can tilt downward when
you shift to Reverse (R) to improve visibility on the
selected side of the vehicle when reversing. The
mirror returns to its original position when you shift
out of Reverse.
When in Reverse, slide the selector switch to the
left or right side.
Down
Night position
Tab
Day
position
Up
Sensor
HomeLink ® Garage Opener*
Program your vehicle to operate up to three remote-controlled devices around
your home—such as garage doors, lighting, or home security systems—using the
buttons on the ceiling.
Training a Button
Park near the system you want to program, and follow the instructions in the
fl owchart below.
To retrain a button or erase codes, see the Owner’s Manual on the Owner
Information CD or at
owners.honda.com (U.S.) or www.myhonda.ca (Canada).
If you need help, visit www.homelink.com .
Press and hold the button on the remote and
the HomeLink button at the same time. Then,
while continuing to hold the HomeLink button,
press and release the button on the remote
every 2 seconds.
Does the LED blink at a faster rate within
20 seconds?
Press and hold the
HomeLink button
again. Training
complete
YES NO
HomeLink indicator
flashes for 2 seconds, then
remains on. HomeLink LED
remains on.
YES NO
YES NO
Position the remote transmitter you wish to
link 1–3 inches (3–8 cm) from the HomeLink
button you want to program.
1
Press and hold the desired HomeLink button
and the button on the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code. Press the
“learn” button on the remote-controlled
device (e.g., garage door opener).
Press the programmed HomeLink button
again; the remote-controlled device should
operate.
Within 30 seconds, press and hold the
programmed HomeLink button for
2 seconds.
a
Press and hold the programmed HomeLink
button for about a second.
Does the device (garage door opener) work?
3
b
4
5
*if equipped
HomeLink
indicator
HomeLink
buttons