P. 100, Lane departure warning (ldw), Blind spot information (bsi) system – HONDA 2015 Odyssey - Owner's Guide (Revised 09/24/2014) User Manual

Page 54

Advertising
background image

100 |

| 101

DRIVING

DRIVING

Lane Departure Warning (LDW)*

A camera mounted between the windshield and the rearview mirror determines if
your vehicle begins to move away from the center of a detected lane while driving
between 40–90 mph (64–145 km/h).

If you cross a detected lane line without using your turn signal, a message appears
on the display or the LDW indicator blinks, and a beep sounds.

Turning LDW On or Off

Press LDW to turn the system on or off. A green
indicator light appears on the button when the system
is on.

Important Safety Reminder

Like all assistance systems, LDW has limitations. Over-reliance on LDW may result
in a collision. It is always your responsibility to keep the vehicle within your lane.

LDW only alerts you when lane drift is detected without a turn signal in use. LDW
may not detect all lane markings or lane departures; accuracy will vary based on
weather, speed, and lane marker condition. It is always your responsibility to safely
operate the vehicle and avoid collisions.

*if equipped

Blind Spot Information (BSI) System*

Alerts you to a detected vehicle in your left or right blind spot.

When a vehicle is detected in your blind spot, the
blind spot indicator turns on and stays lit until the area
is clear.

When your turn signal is on and a vehicle is detected,
the blind spot indicator blinks and a beep sounds until
the area is clear or the turn signal is off.

Important Safety Reminder

Like all assistance systems, BSI has limitations. Over-reliance on the system may
result in a collision. The system is for your convenience only.

Failure to visually confi rm that it is safe to change lanes before doing so may
result in a crash and serious injury or death. Do not rely only on the blind spot
information system when changing lanes.

Always look in your mirrors, to either side of your vehicle, and behind you for
other vehicles before changing lanes.

WARNING

Changing BSI Settings

Determine the warning type, or turn the system off. Use the interface dial to make
and enter selections.

1. Press SETTINGS.

2. Select Vehicle Settings. The vehicle must be in

Park (P).

3. Select Driver Assist System Setup.

4. Select an alert type, or turn the system off.

5. Press BACK to exit the menu.

*if equipped

Lane departure indicator
(models with multi-
information display)

LDW indicator
(models with
information display)

Beep

LDW
button

Advertising