HONDA 2015 Pilot - Navigation Manual - Manual (Page 107)

Navigation System 107
System Setup
1. Stop the vehicle.
2. Select Correct Vehicle Position,
and the system will display the
Correct vehicle position
screen.
3. Use the Interface Dial to move the
vehicle position arrowhead to the
correct location, and push in on the
Interface Dial
. The display will
change to:
4. Rotate the Interface Dial knob so
the vehicle position arrowhead is
pointing in the correct direction, and
push in on the Interface Dial. The
display will return to the previous
screen.
NOTE:
If you continually have to do this, there
are either problems in the database or
GPS reception problems. See
Accessories Precautions on page 5.
5. As you drive, the current road will be
displayed at the bottom of the screen.
Color
From the SETUP screen (Other), say
or select Color and the following
screen appears: