Frequently asked questions, Gps related errors, see, Frequently asked questions on – HONDA 2015 Pilot - Navigation Manual User Manual

Page 143

Advertising
background image

Navigation System 143

Frequently Asked Questions

Map and Features, Voice Operation, Entering Addresses

Problem

Solution

Why does the Disclaimer screen need to be displayed every

time I start the car? I am the only driver.

The Disclaimer screen reminds you and your guest drivers to always

operate the navigation system in a safe manner.

I tried entering an address, but the city or street could not be

found. Is there any other way to route to the location?

Some cities are lumped in with a major metro area. Try entering the street

first. In rural “unverified” areas or new subdivisions, streets may be

missing, or only partially numbered. Try selecting the destination directly
from the map. See By Map Input on page 44.

When I enter an address, some letters become grayed out. Is

this normal?

Yes. As you enter each letter in an address or a point of interest (POI), the

system looks in the database to see what letters are possible and “grays out”
letters that do not apply.

How do I delete Personal Addresses, Previous Destinations,

or the Home Address?

This is done in the SETUP screen (Main Setup), under “Personal

Information.” See page 87.

I cannot hear the navigation system voice.

1) Ensure that Volume in the SETUP screen (Main Setup) is not OFF.

See page 87.

2) Go to “Basic Settings” in the SETUP screen (Other), and set Voice

Recognition Tutor

to ON. See page 96.

The voice control system is having difficulty recognizing my

voice commands.

Ensure that the vents are not blowing on the microphone on the ceiling, the

vehicle is as quiet as possible, and you are using the correct command when
speaking (see Improving Voice Recognition on page 14). Say “Help” at any

screen to see a list of the applicable voice commands. If the system cannot

recognize your command because of background noise, speak louder.

When the system pronounces the street name in the guidance

command or reads the destination address, it sounds strange.

What causes this?

The basic guidance phrase uses a studio-recorded voice, but the street name

is pronounced by the system using a machine-generated voice.

Consequently, the name may be mispronounced or sound strange at times.

When I drive at night, the screen is bright and will not switch

to the night display mode. Why?

Verify the following: The nighttime dash brightness control is not set to

maximum, and Map Color in SETUP is set to Black for Night. See

Switching Display Mode Manually on page 108.

Advertising